Vertical wet pit pumps

Vertical wet pit pumps are intended for use in the pumping applications to pump clean or lightly contaminated liquids. The pumping head is suspended into the pumped liquid and the drive motor is dry installed on the top. The pump has common discharge / support column. The vertical wet pit pump has a vertical line shaft with the slide bearings typically lubricated by the pumped liquid.

The JTS vertical turbine pumps are certified with the NSF /ANSI 61 certification
JTS standard vertical turbine pump
The JTS vertical turbine pump integrates the tradition of providing Sulzer's highly engineered and reliable vertical turbine pump with the standardization of materials and configurations available in bowl sizes of 180 to 510 mm (7 to 20 inches).
JVCR High Pressure Canned LNG Loading Pumps
JVCR high pressure canned LNG loading pump
The JVCR pump is an ISO13709 / API610 Type VS6 vertical multistage can pump that is used in situations where Net Positive Suction Head Available (NPSHa) is limited. A wide range of hydraulics, discharge headgear, and pressure ratings may be supplied depending on individual application requirements.
SJD-API vertically suspended process pump
The SJD-API are API 610 Type VS6/VS7 pumps whose design has evolved from many years of experience. They utilize Sulzer's low Net Positive Suction Head (NPSH) 1st stage, followed by unique high head per stage series hydraulics, to minimize the number of stages required.
SJD CEP Vertical Multistage an Pump for Condensate Extraction
SJD-CEP vertical multistage can condensate extraction pump
SJD-CEP vertical can condensate extraction pumps, are specified wherever limited NPSH is available, either due to system constraints or liquids operating near to their vapor pressure, typically for condensate extraction and heater drain pump applications.
SJP Vertical Propeller Pumps
SJP vertical propeller pump
SJP vertical propeller pumps are typically used to pump large flows of water upward at low head from open water sources such as oceans, rivers, lakes, cooling ponds, tanks and sumps.
SJT (Geo) for geothermal production hot water
SJT-GEO for geothermal production hot water
Sulzer SJT-GEO are designed for geothermal production in shallow wells. The pump can be adapted to the optimum length to pump hot water at the needed output flow.
SJT/SJM CWP vertical pump non-pull out
SJT-CWP vertical cooling water pump
The SJT-CWP are "engineered to order" large flow vertical pumps for industrial pumping needs and sump design, with semi-open or closed cast impellers available in sizes starting from 350 mm (14") impeller diameter and nq 75 (Ns 3'870).
SJS submersible pump
The SJS submersible pumps utilize a submersible motor to drive the Sulzer vertical pump stages. The normal vertical turbine lineshaft and bearings are thus eliminated and power levels to 2 MW (2,700 hp).
VEY molten salt pump for concentrated solar power
VEY and VNY molten salt pump for concentrated solar power
The VEY and VNY are vertical mixed-flow molten salt pumps with high capacity and medium to high head. Its design includes hydraulics from proven ranges. These pumps have been engineered to balance high efficiency, low submergence, net positive suction head required (NPSHR) considerations, long lifetime and reliability as required for concentrated solar power.
SJT vertical turbine pump
SJT vertical pump
SJT pumps are typically used whenever a liquid needs to be pumped upward from ground water tables (deep well pumps), manmade underground storage (caverns) or open bodies of liquid. Fully updated hydraulics and mechanical designs make the SJT highly efficient, cost- effective, and low-maintenance.

Related documents
Contact us