- Plug-and-pump installation without having to worry about overheating.
- Reliable, trouble-free operation also at low water levels.
- High wear resistance ensures years of cost-efficient pumping.
- Serviceability with modular design.
Submersible drainage pump J 12
Low-weight and compact design
- J 12 W/WKS* medium head: 1~
- J 12 D/DKS* medium head: 3~
Weight: D: 18 kg (40 lb), W: 19 kg (42 lb)
*option: built-in float switch excluding 500 V / 575 V
Motor protection
Built-in thermal switches in the stator winding (140ºC / 284ºF, ±5)
Discharge connections
1½”, 2” (standard), 2½", 3” hose connections
2”, 2½”, 3" B.S.P. threaded connections
2”, 3" NPT. threaded connections
Storz coupling available as an accessory
Plug-and-pump installation
Plug in without having to worry about overheating. Built-in thermal protection protects the motor from overheating.
Wear resistance
One investment for years of cost-efficient pumping. Impeller in high chrome alloy steel ensures a long lifetime and high efficiency.
Reliable operation - minimizes maintenance time
Double outer casing and good heat convection enable the pump to operate continuously at low levels or even run dry without damaging the motor.
Serviceability
Save time and money with easy on-site service. Modular design lowers the overall service costs. By removing the top cover of the pump, you can easily check the electrical junction box. Environmentally safe white oil is used in the oil casing for easy inspection of seal conditions.
Electric submersible pump | J 12 |
Maximum submergence | 20 m |
Protection class | IP 68 |
Max. temperature of pumped medium at max. power input and continuous duty | 40ºC |
Max. media density | 1,100 kg/m3 |
pH of the pumped medium | 5-8 |
Strainer hole | 6.5 x 22 mm |
Max number of starts | 30/hour |
Motor rating P2 | 0.9 kW, 1.4 kW (110 V) |
Speed | 2,770 rpm, 2,825 rpm (110 V) |
Power cable | 20 m type H07RN8-F |
Electric submersible pump | J 12 |
Maximum submergence | 20 m |
Protection class | IP 68 |
Max. temperature of pumped medium at max. power input and continuous duty | 40ºC |
Max. media density | 1,100 kg/m3 |
pH of the pumped medium | 5-8 |
Strainer hole | 6.5 x 22 mm |
Max number of starts | 30/hour |
Motor rating P2 | 1.1 kW |
Speed | 3,360 rpm (1~), 3,380 rpm (3~) |
Power cable | 20 m type H07RN8-F |
Electric submersible pump | J 12 |
Maximum submergence | 65 ft |
Protection class | IP 68 |
Max. temperature of pumped medium at max. power input and continuous duty | 104ºF |
Max. media density | 0.0397 lb/inch3 |
pH of the pumped medium | 5-8 |
Strainer hole | 1/4" x 7/8" |
Max number of starts | 30/hour |
Motor rating P2 | 1.5 Hp |
Speed | 3,360 rpm (1~), 3,380 rpm (3~) |
Power cable | 65 ft AWG |