Pump

Lifting station

  • Lifting Station Type ABS Nirolift
    Lifting station type ABS Nirolift
    The Nirolift is a polyethelyne, standalone sump for below-ground use. It provides effluent pumping from washing machines, sinks, dishwashers, showers, and bathtubs.
  • Lifting station type ABS Sanimax
    Lifting station type ABS Sanimax
    The Sanimax is a sump for floor-level installation featuring a submersible pump from the Robusta or MF ranges including the MF 154 HW hot water pump.
  • Lifting Station Type ABS Sanisett
    Lifting station type ABS Sanisett
    The Sanisett 1 and 2 are sumps for one or two pumps, designed for above- or below-ground use and provide effluent pumping from washing machines, sinks, dishwashers, showers, and bathtubs.

Control panel

  • Control panel type ABS CP 114
    Control panel type ABS CP 114
    The CP 114 is a compact control panel for single pumping stations. It is suitable for use in applications such as tanks, small pits, or standard commercial applications with a single-phase 1/230/N/PE power supply.
  • Control panels type ABS CP 116 and CP 216
    Control panel type ABS CP 116 and CP 216
    The CP 116 and CP 216 compact control panels for one or two pumps directly connect to pumps up to 5.5 KW (12A). The optional GSM/GPRS modem allows communication with AquaWeb or Supervisory Control and Data Acquisition (SCADA) systems using the Comli or Modbus protocols. Ex-versions are also available.
  • Pump control panels type ABS
    Control panels
    A wide range of control panels are available to enable a strong and flexible product offering. New panels are added continuously to match market needs and demands.
  • Control panels type ABS CP 112 and 212
    Control panels type ABS CP 112 and CP 212
    The CP 112 and CP 212 are compact control panels for one or two pumps. They directly connect to pumps up to 5.5 kW (12A), and feature three-phase and single-phase versions. Ex-versions are also available.
  • Pump control panels type ABS
    Pump control panels
    A wide range of control panels are available to enable a strong and flexible product offering. New panels are added continuously to match market needs and demands.

Measuring device

  • Conductive level switch type ABS MD 131
    Conductive level switch type ABS MD 131
    The MD 131 is a conductive level switch primarily used as an overflow switch in sewage pumping pits. The MD 131 can also be used in other applications where the conductivity of the medium is above 20 μS/cm.
  • Float switch type ABS KS
    Float switch type ABS KS
    The KS float switch, used in liquids for control or signal activation, operates in response to the liquid level. It is also suitable for use in sewage and for automatic level control. The KS float switch is impact- and shock-resistant, mercury-free, and environmentally friendly.
  • Submersible Pressure Sensor Type ABS MD 127
    Measuring devices
    A wide range of measuring devices is available to enable a strong and flexible product offering. New devices are added continuously to match market needs and demands.
  • Pressure Sensor Type ABS MD 124
    Pressure sensor type ABS MD 124
    The MD 124 is a 4-20 mA loop-powered pressure sensor. It has a robust construction and is easily mounted on a standard 35 mm DIN rail. MD 124 is ideal for measuring liquid levels using the ”bubble tube” principle.
  • Submersible pressure sensor type ABS MD 126
    Submersible pressure sensor type ABS MD 126
    The MD 126 is a high-accuracy submersible hydrostatic level sensor. Encapsulated in stainless steel and resistant to sewage water, it is designed to measure levels in liquids such as storm water and wastewater in sump pumps.
  • Submersible Pressure Sensor Type ABS MD 127
    Submersible pressure sensor type ABS MD 127
    MD 127 is a sewage water resistant, stainless steel encapsulated, submersible, hydrostatic level sensor of very high accuracy and over pressure capability. It is designed for level measurement in liquids like stormwater and wastewater in pump sumps. When connecting the 2-wire loop powered sensor in series with a DC power supply, the MD 127 gives a 4 to 20 mA output signal which is proportional to the level of the liquid.

Control accessory

  • Leakage relay type ABS CA 461
    Leakage control type ABS CA 461
    CA 461 is designed to spy and detect leakage in pumps and mixers. The amplifier is housed in a norm enclosure fitted for DIN-rail mounting. The unit is available in two executions, 24 VDC or 110-230 VAC supply.
  • The temperature and leakage relay type ABS CA 462 detects temperature and leakage in pumps and mixers
    Temperature and leakage relay type ABS CA 462
    CA 462 is designed to spy and detect temperature and leakage in pumps and mixers. The amplifier is housed in a norm enclosure fitted for DIN-rail mounting. The unit is available in two executions, 24 VDC or 110-230 VAC supply.

Pump controller

  • Equipment controller EC 531
    Equipment controller EC 531
    The EC 531 is an all-in-one solution for control and monitoring of pumping stations with one or two pumps. EC 531 is equipped with smart VFD control including PID and Best Efficiency Point (BEP).
  • Pump Controller Type ABS PC 111
    Pump controller type ABS PC 111
    The PC 111 is a single-pump controller designed mainly for use in either gravitation or pressurized municipal wastewater pumping stations. Its many simple-to-use features improve pumping station functionality and reliability throughout its life-cycle.
  • Pump Controller Type ABS PC 211
    Pump controller type ABS PC 211
    The PC 211 is an easy-to-use dual-pump controller designed mainly for use in either gravitation or pressurized municipal wastewater pumping stations. Its numerous features improve pumping station functionality and reliability throughout its life-cycle.

You may also be interested in
ABSEL water and wastewater pump selection tool
ABSEL water and wastewater pump selection tool
Sulzer employee at wastewater facility
Case studies
Contact us