- Portable and lightweight: easy to handle and use for both manual and automatic operation
- Well suited for emergency services due to a minimum requirement of accessories
- Hydraulics with Contrablock system or vortex impellers for blockage free operation
- High-efficient compact design
- Integrated float switch as an option (single-phase pumps up to 0.5 cv / 0.37 kW)
- Motor housing made of corrosion-resistant material and outer jacket and impeller of durable plastics
- Low maintenance
Light drainage pump type ABS UNI (available in Brazil only)
Easy-to-handle portable pumps
Plug-in submersible pumps designed to remove clean water and wastewater containing solids up to 7 mm. The pump and motor section form a pressure-tight encapsulated unit which is fully flood-proof. Portable and lightweight, the pump type ABS UNI is suitable for both manual and automatic operation.
- Drainage of pits, flooded cellars and swimming pools
- Removal of clean water and wastewater containing solids up to 7 mm
- Removal of rainwater
- Garden irrigation
- Water supply to tanks and cisterns
Main design features
- Built-in thermal protection
- Single-phase motor with permanent capacitor
- Protection type IP 68
- Ball bearings lubricated by insulating nontoxic oil
- Housing made in casting iron (EN-GJL-250: GG25)
- Carbon/ceramic mechanical seal
- Power cord inlet sealed with rubber and epoxy resin
- Standard 5 meter cable
Key characteristics
Pump Type ABS UNI with float switch
| Capacities | Up to 60 m³/h / 264 US gpm |
| Heads | 28 m / 92 ft |
| Temperatures | 40°C / max. 60°C for five minutes |
| Discharge sizes | 2”, 3” BSP and NPT threaded connections |
| Maximum speed of rotation | 3,450 rpm |
| Rated power | 0.25 – 3.0 kW / 0.33 – 4.0 cv (only 60Hz motors available) |
